Sensors

 

 

CO-MFS

M-Series:

This small, 0.5” diameter, high performance gas sensor was developed for use in the probe of an indoor air quality (IAQ) meter. It has a unique profile at ½”D and 1”H. (click name of sensor for data sheet)CO-MFS: 3-electrode electrochemical sensor for 0-1000ppm CO, with integrated high-capacity interference filter. This sensor has been integrated by one customer with T, RH, and NDIR CO2 sensor into a 4-parameter IAQ probe which is less than 0.75” diameter.

H2S-MNS: 3-electrode electrochemical sensor for H2S, range 0-500 ppm.

NO2-MNL: 3-electrode electrochemical sensor for NO2, range 0-10 ppm.

NO-MFS: 3-electrode electrochemical sensor for NO, range 0-1000 ppm.

 

 

 

R Series

R-Series: 

3-electrode amperometric sensor for CO, H2S, NO, NO2, and O3. The nanotechnology-enabled and patented TTI R-series sensor is a 3-electrode system with pin connections (for working, reference, and counter electrodes). While the standard configuration provides compatibility with the industry-standard ‘7-Series’ package, the pin configuration can be customized to match virtually any customer specification. These cost effective sensors are based on a design that has been proven for over 10 years in the field and have the highest reliability of any electrochemical sensor. (click name of sensor for data sheet)

RCO1000/RCO1000F: Carbon Monoxide: Range 0-1000 ppm .Recommended for normal, ambient environments.

RCO1000HRH: Carbon Monoxide: Range 0-1000 ppm; designed for prolonged use in high humidity applications. Data sheet on request.

RCO1000LRH/F: Carbon Monoxide: Range 0-1000ppm; designed for prolonged use in low RH applications, such as inline monitoring of breathing air.

RH2S100: 3-electrode electrochemical sensor for H2S, range 0-100 ppm.

RNO2100:  3-electrode electrochemical sensor for NO2, range 0-100 ppm.

ROZ050: 3-electrode sensor for ozone uses proprietary working electrode catalyst, for improved stability and wide operating range, 0-50 ppm. Data sheet on request.

 

S-Series: 

The S-Series is our most mature line of sensors, with a 15+ year track-record. The package is very similar to the ‘7-Series’, and in many applications may be used interchangeably. The S-Series is appropriate for typical applications, including ambient CO and H2S monitoring, however it is built using machined parts for extreme tolerance, so it may be used in more demanding environments. (click name of sensor for data sheet)

CO-SNS: 3-electrode electrochemical sensor for CO, range 0-1000 ppm.CO-SNH: 0-5% CO, with low (<1:10) hydrogen cross-sensitivity – ideal for auto and other engine exhaust tuning. Data sheet on request.

NO2-SNL: 3-electrode chemical sensor for NO2, range 0-10ppm with a resolution of 1 ppb and a typical detection limit of 5ppb. Data sheet on request.

NO-SNS: 3-electrode electrochemical sensor for NO, range 0-1000 ppm. Data sheet on request.

 

 

T Series

T-Series: 

Enabled by nanotechnology and a new unique approach in sensor design, the ultra low-power TTI T-series sensor with its tiny ½ inch square footprint and less than ¼ inch high profile provides powerful sensor specifications in a small package. The T-Series sensors have small size and low cost but boast premium performance specifications and offer operating lifetimes comparable to the larger designs.  This sensor was designed for ultra-small requirements, such as wearable monitors.

3ET1CO1500: 3-electrode electrochemical sensor for CO, range 0-1500 ppm

3ET1H2S100: 3-electrode electrochemical sensor for H2S, range 0-100 ppm.

3ET1OZ-020: 3-electrode sensor for ozone uses proprietary working electrode catalyst, for improved stability and wide operating range, 0-20 ppm. Data sheet on request.